[라즈베리파이] Open407V-C Standard  
STM32F407V 시리즈 개발보드 다양한 인터페이스통합, 쉬운 주변기기 확장
상품번호

3833185 [제품문의시 불러주세요]

무이자할부
무이자할부 카드안내 X
3~12개월 5만원이상
3~12개월 5만원이상
3~12개월 5만원이상
3~12개월 5만원이상
3~12개월 5만원이상
3~12개월 5만원이상
3~12개월 5만원이상
3~12개월 5만원이상
제조사 Waveshare
원산지 CHINA
0 (부가세별도) 
0 (부가세포함) 
배송
* 여러개의 상품 배송방법 변경은 장바구니에서 가능 합니다
배송비
100,000원 이상 무료 미만2,500원
기본배송비 : 2,500원 (100,000원 이상 무료)
추가배송비 : 3,000원 (지역별)
기본배송비 : 지역에 따라 다름.
평균 배송일 국내 1~2일, 해외 3~5일 소요 (길어질시 개별연락)
안 내 해외상품 반도체 경우 재고 및 가격변동이 있을 수 있으니 결제전 고객센터(1644-4457) 또는 카카오톡 플러스친구로 먼저 문의 부탁드립니다.
주문수량
총 상품금액 0
페이스북 트위터 카카오톡 
상세정보
상품후기
상품문의
배송/반품안내
STM32 development board designed for STM32F407V series, features the STM32F407VET6/STM32F407VGT6 MCU, and integrates various standard interfaces, pretty easy for peripheral expansions.

STM32F407VET6 development board

Overview

Open407V-C is an STM32 development board designed for the STM32F407VET6 microcontroller, consists of the mother board and the MCU core board Core407V.

The Open407V-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32F4 series microcontrollers.


What's on the mother board

STM32F407VET6 development board on board resource

    1. MCU core board connector: for easily connecting the Core407V
    2. ULPI interface: for connecting high-speed USB peripheral (the STM32F407V integrates USB HS controller without any PHY device)
    3. FSMC + SPI interface (16-bit FSMC + SPI): for connecting touch screen LCD
    4. FSMC interface (8-bit FSMC): easily connects to peripherals such as NandFlash, Ethernet, etc.
    5. SPI1/SPI2 + AD/DA interface
      • easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.
      • SPI1 features AD/DA alternative function, supports connecting AD/DA module as well
    6. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI
    7. I2S2/I2S3/I2C1: for connecting I2S peripherals, such as Audio module
    8. USART2 interface: easily connects to RS232, RS485, USB TO 232, etc.
    9. CAN1 interface: communicates with accessory boards which feature the CAN device conveniently
    10. CAN2 interface: communicates with accessory boards which feature the CAN device conveniently
    11. I2C1/I2C2 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), FRAM (FM24CLxx), etc.
    12. DCMI interface: for connecting digital camera
    13. UART3 interface: easily connects to RS232, USB TO 232, etc.
    14. Ethernet interface: easily connects the MCU to ethernet network by using an additional ethernet module
    15. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
    16. 5V DC jack
    17. 5V/3.3 V power input/output: usually used as power output, also common-grounding with other user board
    18. MCU pins connector: VCC, GND, and all the I/O ports are accessible on expansion connectors for further expansion
    19. SD Card Detect jumper
    20. LEDs jumper
      • short the jumper to connect to default I/Os used in example code
      • open the jumper to connect to custom I/Os via jumper wires
    21. User key/Wake-Up button jumper
      • short the jumper to connect to default I/Os used in example code
      • open the jumper to connect to custom I/Os via jumper wires
    22. Joystick jumper
      • short the jumper to connect to default I/Os used in example code
      • open the jumper to connect to custom I/Os via jumper wires
    23. LCD backlight adjustment jumper
      • short the jumper to enable LCD backlight adjustment
      • open the jumper to disable and disconnect from the I/O ports
    24. LEDs: convenient for indicating I/O status and/or program running state
    25. User key: convenient for I/O input and/or interact with running code
    26. Wake-Up button: wake up the STM32 MCU from sleep mode, also used as regular user key
    27. Joystick: convenient for I/O input (five positions)

What's on the Core407V

STM32F407VET6 development board on board resource

    1. STM32F407VET6:the high performance STM32 MCU which features:
      • Core: Cortex-M4 32-bit RISC
      • Feature: a full set of single-cycle DSP instructions
      • Operating Frequency: 168MHz, 210 DMIPS/1.25 DMIPS/MHz
      • Operating Voltage: 1.8V-3.6V
      • Package: LQFP100
      • Memories: 512kB Flash, 192+4kB SRAM
      • MCU communication Interfaces:
        • 3 x SPI, 3 x USART, 2 x UART, 2 x I2S, 3 x I2C
        • 1 x FSMC, 1 x SDIO, 2 x CAN
        • 1 x USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY
        • 1 x 10/100 Ethernet MAC
        • 1 x 8 to 12-bit parallel camera interface
      • AD & DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)
      • Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
    2. AMS1117-3.3 (on bottom side): 3.3V voltage regulator
    3. MIC2075 (on bottom side): onboard USB power management device
    4. Power supply switch, powered from 5Vin or USB connection
    5. Boot mode switch, for configuring BOOT0 pin
    6. Power indicator
    7. Reset button
    8. 8M crystal oscillator
    9. 32.768K crystal (on bottom side), for internal RTC with calibration
    10. JTAG/SWD interface: for debugging/programming
    11. USB connector, used for establishing USB communication between PC and the STM32 development board
    12. IO expander (including VCC/GND), all the MCU pins are accessible on expansion connectors for further expansion
    13. 5Vin pinheader, 5V power supply is required when using USB HOST/OTG
    14. USB jumper
      • short the jumper when using USB
      • open the jumper to disconnect from I/O ports
    15. VBAT selection jumper
      • short the jumper to use system power supply
      • open the jumper to connect the VBAT to external power, such as battery
    16. VREF selection jumper
      • short the jumper to connect VREF+/VREF- to VCC/GND
      • open the jumper to connect VREF+/VREF- to other custom pin via jumper wire

Photos

STM32 Development Board
Open407V-C development board
STM32 Development Board
Open407V-C development board
STM32 Development Board
Open407V-C development board back view
STM32 Development Board
Open407V-C mother board
STM32 MCU Core Board
MCU core board Core407V
STM32 MCU Core Board
MCU core board Core407V
STM32 Development Board
Connecting to a debugger
STM32 Development Board
Connecting to various peripherals

Open407V-C μC/OS-II (Ⅰ)

Open407V-C μC/OS-II (Ⅱ)

Open407V-C μC/OS-II (Ⅲ)

Open407V-C μC/OS-II (Ⅳ)
USB Device
Connecting to USB device through OTG cable
USB3300 USB HS Board
Connecting to USB3300 USB HS Board
UDA1380 Board
Connecting to UDA1380 Board
OV9655 Camera Board
Connecting to OV9655 Camera Board
RS232 Board
Connecting to RS232 Board
RS485 Board
Connecting to RS485 Board
PL2303 USB UART Board mini
Connecting to USB UART Board
SN65HVD230 CAN Board
Connecting to CAN Board
8 Push Buttons
Connecting to 8 Push Buttons
5 IO Keypad
Connecting to 5 IO Keypad
AD Keypad
Connecting to AD Keypad
Analog Test Board
Test Board on the AD/DA port
FM24CLXX FRAM Board
Connecting to FRAM Board
I2C cascading x3
Multi I2C peripheral Module connected to the I2C bus
AT45DBXX DataFlash Board
Connecting to DataFlash Board
VS1003B MP3 Board
Connecting to VS1003B MP3 Board
NRF24L01 RF Board
Connecting to NRF24L01 RF Board
Micro SD Storage Board
Connecting to Micro SD Storage Board
NandFlash Board
Connecting to NandFlash Board
DP83848 Ethernet Board
Connecting to Ethernet Board
Connecting to any accessory board
Connecting to any accessory board you need

Note: 
The Open407V-C supports programming via STM32 UART bootloader, a USB TO UART accessory board is also provided in the package. 
The Open407V-C does NOT integrate any debugging function, a debugger is required.


JTAG/SWD interfaces

The figure 1, and 2 show the header pinouts of JTAG/SWD interface

Figure 1. JTAG Header Pinout
JTAG Header Pinout
Figure 2. SWD Header Pinout
SWD Header Pinout

Development Resources

  • Related software (KEIL etc.)
  • Demo code (examples in C, μC/OS-II)
  • Schematic (PDF)
  • STM32 development documentations (Datasheet etc.)

Wiki: www.waveshare.com/wiki/Open407V-C

PACKAGE CONTENT

Weight: 0.283 kg

  1. Open407V-C development board x 1
  2. PL2303 USB UART Board (mini) x 1
  3. USB type A plug to mini-B plug cable x 1
  4. USB type A receptacle to mini-B plug cable x 1
  5. 4-pin wire x 2
  6. 2-pin wire x 2
  7. USB power cable x 1
1 2 3 4 5 6
7


상세정보
상품후기
상품문의
배송/반품안내



상세정보
상품후기
상품문의
배송/반품안내



상세정보
상품후기
상품문의
배송/반품안내
1. 주문하신 물품의 총 결제금액이 15만원 이상 (환율의 변동에 따라 다를 수 있음) 이면 과부가세가 발생합니다. 관부가세는 고객님께서 부담하시는 금액으로 문자를 통해 입금내역이 발송되며 해당 관세사로 입금하시면 통관처리됩니다.

2. 해외구매 특성상 주문에서 배송까지는 평균 10~15일이 소요됩니다. 간혹 현지 제품 수급에 따라 부득이하게 시일이 더 소요 될 수 있으니 구매시 좀 더 여유있게 주문하시길 권합니다.

3. 해외 내수품인 관계로 A/S에 대해서는 별도의 책임을 지지 않습니다.

4. 해외배송 특성상 주문접수후 배송상태가 배송준비중으로 넘어간 경우 해외에서 국내로의 배송이 이루어지고 있다는 뜻입니다. 따라서 배송준비중으로 배송상태가 넘어간 경우 취소및 반품이 불가하므로 이점 양해 부탁드립니다.

5. 타 해외구매대행 사이트에서 주문하신 물건과 주문날짜가 겹치지않도록 주의해 주십시오. 통관날짜가 같을 경우 합산관세가 부가되게 됩니다.

CS CENTER

1644 - 4457

CUSTOMER SERVICE

주문/배송문의 쇼핑문의 이용안내 제품문의 1:1문의 자주하는질문

BANK INFO

신한은행 140 011 044291 예금주 (주)인투피온 소영삼
  • 회사소개 개인정보처리방침 이용약관 입점안내 광고안내 아이디/비밀번호찾기
  • 통장사본 파일다운 회사소개서 다운

(주)인투피온

대표:소영삼 사업자등록번호:113-86-29364 [사업자정보확인] 통신판매신고:2015-서울구로-1028

본사 : 서울 구로구 경인로 53길 90 STX W-Tower 1307호

매장 : 서울 구로구 경인로 53길 15 중앙유통단지 가동 3101호

전화번호 :1644-4457 팩스번호: 02-6124-4242 이메일: info@intopion.com / Hosting Provider : ㈜가비아씨엔에

개인정보관리책임자 : 이성민

회원님의 소중한 개인정보 보호를 위해 비밀번호를 주기적으로 변경하시는 것이 좋습니다.
현재 비밀번호
신규 비밀번호
신규 비밀번호 확인
6~20자, 영문 대소문자 또는 숫자 특수문자 중 2가지 이상 조합